CNC Router Course for Beginers

CNC Router Course for Beginners

Want to learn how to design cnc projects and run them on the cnc router?

John Hassell will be running a two part beginner's course for those interested in CNC routing.

The course will be run over two consecutive Saturday morning sessions. The first Saturday session on December 10th will be an introduction to VCarve Pro, the CAD software used to design cnc projects. The second Saturday session on December 17th will be practical work on the cnc  router.

In the first session we will work through a simple name plate design in VCarve Pro step by step, and in the second session we will look at how to set up and machine your project .

To participate in this course you will need:-

1. Reasonable computer literacy.

2. A Windows laptop computer and mouse. Sorry, VCarve Pro will not run on an Apple computer.

3. A functioning copy of VCarve Pro Trial Edition installed on your laptop. This can be downloaded from https://www.vectric.com/free-trial/vcarve-pro

4. A piece of MDF or pine roughly 350 mm x 50 mm x 15 mm

The course is free, but you will need to take a ticket as we limit numbers to the first 10 persons.

See you there.

John Hassell

CNC Router Group