We are scheduled to prepare another Homeless meal in cooperation with Matilda Bay Rotary Club. Now that Summer has well & truly taken hold, we will be cooking a more fresh and healthy menu for our Homeless meals, depending on the type of produce that will be dropped off by MBRC. Anybody is welcome to drop by our kitchen and say 'Hello' to our team. Best regards, Geoff.

Thank you for booking your next adventure! You will hand-fly the simulator, operate the engines, see how the navigation systems work, all under close supervision with your guide (instructor). We can only take one person at a time in a pilot’s seat, but we do have 2 passenger seats if you would like to “bring a friend”, or two. To book, please email flightsim.lead@msclaremont.tidymail.co. If the times that we have scheduled do not suit you, or are already booked, please send us an email anyway, and we will do our best to accommodate you. Subject to the availability of a simulator guide (instructor), we can operate  Mon – Fri  8.30am – 4.30pm.

Woodworking Machinery Induction (Blue Dot) – Phases 1 & 2 All Members who wish to use the woodworking machinery in the Machine Room will need to complete Phase 1 & Phase 2 of the Woodworking Machinery Induction Training. Please Note that Members must have completed the Red Dot course before enrolling in this Blue Dot course? This Course will be conducted in two Phases over two consecutive weeks (9am - 12pm) so you must be able to commit to both sessions before purchasing a ticket. Each Phase will be approximately a three hour duration. There will be a maximum of 3 persons for each Session. The Cost of this course (for both Phases) is $20.  If after booking, for some reason you cannot attend the training, please advise Michael Cahill on 0459062090 as soon as possible, so we can arrange another session for you.  If you cancel or are a “no show” on the day you will lose your $20 fee so please, only book if you can commit to the two consecutive weeks. Payments can be made online by secure credit card.  Once you have completed both phases of the Woodworking Machinery Induction your Membership Badge will be updated to replace the Red Dot with a Blue Dot.  This will reflect that you have completed all the necessary Woodworking Training and are ready to undertake any Woodworking projects in the Shed. 

Thank you for booking your next adventure! You will hand-fly the simulator, operate the engines, see how the navigation systems work, all under close supervision with your guide (instructor). We can only take one person at a time in a pilot’s seat, but we do have 2 passenger seats if you would like to “bring a friend”, or two. To book, please email flightsim.lead@msclaremont.tidymail.co. If the times that we have scheduled do not suit you, or are already booked, please send us an email anyway, and we will do our best to accommodate you. Subject to the availability of a simulator guide (instructor), we can operate  Mon – Fri  8.30am – 4.30pm.

To maintain your Blue Dot Woodworking Accreditation you will need to, you will need to undertake a Verification of Competency (VOC) Assessment as follows. Woodworking members aged under 75 years will be assessed every 24 months Woodworking members aged 75 to 80 years will be assessed every 18 months Woodworking members aged 80 to 90 years will be assessed every 12 months Woodworking members older than 90 years  will be assessed every 6 months You will be assigned a simple task which shouldn’t take more than about 30 minutes. This is not a test of your craftsmanship; it is simply a demonstration that you can competently use the machinery unsupervised without endangering yourself or others.  You can book your VOC Assessment by clicking on your preferred VOC Assessment date below. The Rostered Supervisor for the day will oversee your assessment and he will either deem you "competent" or refer you to a Trainer for further assessment or training. If you choose not to do the VOC Assessment,  you will no longer be able to use the Machine Room equipment unsupervised.

Andrew Oakeley is our guest speaker for this meeting. He is the son of our very own long standing member, Chris Oakeley. In Andrew's own words, here is a brief description of the talk, their achievements and of Andrew. Title: The Rottnest Deepwater Scuttle Ground: How deep scuba dives and modern technology is identifying unknown shipwrecks and bringing them to the community. Abstract: What does it take to dive deeper than 100m, and how a team of Perth divers is visiting shipwrecks on the edges of continental shelf and creating 3D models from the data they bring back. Between 1910 and 1994 Commonwealth Dumping Area 7, off the back of Rottnest island in water depths of up to 200m, became the final resting place of surplus equipment such as ships, planes, submarines and ammunition. The Perth dive team WreckSploration have been discovering the final resting places of vessels in this area and creating stunning 3D models to identify the wrecks and for the public to enjoy. Come along and hear Andrew Oakeley walk you through the mechanics of a dive deeper than 100m and showcase the team’s discoveries. About the presenter: Andrew is an IT Consultant with over 10 years’ experience in technical diving. Andrew has amassed extensive experience in deep diving, rebreather systems, underwater exploration, and maritime heritage advocacy in the community. Andrew co-founded WreckSploration in 2022 and currently serves as its President. Andrew was awarded OzTek Technical Diver of the Year 2025 WreckSploration was the recipient of the 2024 WA Heritage Award for Outstanding Contribution to State Heritage Preservation by an Organisation, and in 2025 received international acclaim for their discovery of the Dutch submarine HNLMS K XI south of Rottnest This should be a fascinating look into our past history, occuring right here on our very own doorstep at Rotnest, under very difficult conditons. So come along and be informed and enjoy the companionship of your fellow Sheddies and friends  

All Members who intend to be part of the Woodworking Group will need to complete this Power Tools Induction Training. There is a once off Cost of $10 for this Training Course, which can be paid when you purchase a ticket. Note: Members are required to complete the 'Yellow Dot' Shed Introduction session before taking part in a Red Dot training session. There will be a maximum of 3 persons for each Training Session.  If after booking, for some reason you cannot attend the training, please advise the Red Dot coordinator, Jeremy Wallace, on 0406927650 (SMS please), or email (jeremywallace5@outlook.com) as soon as possible, so we can arrange another session for you.  If you have trouble booking please contact Jeremy by SMS. The successful completion of the Red Dot Training is a pre-requisite to booking the Blue Dot Woodwork Machinery Course. Once you have completed this Training, your Membership Badge will updated to show a Red Dot and enable you to undertake any projects in the Main Workshop that utilise only Power Tools. 

The training on the Laser Cutter in February continues this morning with some of the registered attendees.

Fish en Papillotte by "Chef Mario" ! For the February monthly lunch we will be preparing the classic French seafood dish "Fish en Papillotte". Chef Mario Properzi will lead our Kitchen Team in the preparation of this dish which will be served with a fresh garden salad. This will be followed by a surprise dessert fitting for the summery conditions - you will love it!  So sign up, come along and enjoy a meal with your mates! Cost for food will be $25 with beer and wine at standard prices.   As usual, we need pre-payment with your registration. You will be able to get a credit towards a future event if you cancel at least 24 hours before the event. Should you need to cancel, please send an email to wernerribul@mac.com. No-shows on the day will forfeit their ticket fee. We hope you will be able to join us. Best regards, Werner and Michael

To maintain your Blue Dot Woodworking Accreditation you will need to, you will need to undertake a Verification of Competency (VOC) Assessment as follows. Woodworking members aged under 75 years will be assessed every 24 months Woodworking members aged 75 to 80 years will be assessed every 18 months Woodworking members aged 80 to 90 years will be assessed every 12 months Woodworking members older than 90 years  will be assessed every 6 months You will be assigned a simple task which shouldn’t take more than about 30 minutes. This is not a test of your craftsmanship; it is simply a demonstration that you can competently use the machinery unsupervised without endangering yourself or others.  You can book your VOC Assessment by clicking on your preferred VOC Assessment date below. The Rostered Supervisor for the day will oversee your assessment and he will either deem you "competent" or refer you to a Trainer for further assessment or training. If you choose not to do the VOC Assessment,  you will no longer be able to use the Machine Room equipment unsupervised.

Woodworking Machinery Induction (Blue Dot) – Phases 1 & 2 All Members who wish to use the woodworking machinery in the Machine Room will need to complete Phase 1 & Phase 2 of the Woodworking Machinery Induction Training. Please Note that Members must have completed the Red Dot course before enrolling in this Blue Dot course? This Course will be conducted in two Phases over two consecutive weeks (9am - 12pm) so you must be able to commit to both sessions before purchasing a ticket. Each Phase will be approximately a three hour duration. There will be a maximum of 3 persons for each Session. The Cost of this course (for both Phases) is $20.  If after booking, for some reason you cannot attend the training, please advise Michael Cahill on 0459062090 as soon as possible, so we can arrange another session for you.  If you cancel or are a “no show” on the day you will lose your $20 fee so please, only book if you can commit to the two consecutive weeks. Payments can be made online by secure credit card.  Once you have completed both phases of the Woodworking Machinery Induction your Membership Badge will be updated to replace the Red Dot with a Blue Dot.  This will reflect that you have completed all the necessary Woodworking Training and are ready to undertake any Woodworking projects in the Shed.